Decorative panels for glueless (dry) mounting, imitating a stone surface

 Catalog
 General Info
 Mounting
 Where to buy

CATALOG

"Art-Kamen" company mastered the new direction and offers you the decorative panel for glueless (dry) mounting.

The panel is made of white M-500 high-strength cement and has special fastening - metal fixing hooks made of galvanized steel. By means of these hooks the panel fastens by self-tapping screws to furring.

The similar method of facing can be used for any wall surface: bar, log, brick, foam concrete block, extruded polystyrene foam, etc.)
As a result of mounting works of decorative panels by a glueless method we have the impressive wall surface rendering color and a relief of a natural stone.

Mounting of decorative stone panels on wooden or metal guides allows to warm any facade additionally (if this is necessary). In this case, we recommend to use as a heater mineral (or stone) wadding and a vapor isolating layer.

 Mechanical fastening by self-tapping screws is very reliable and maintains 150 kg of tearing off load. The weight of panels varies from 30 to 40 kg for sq.m. The artificial stone is much less in weight than natural, but at the same time has all the benefits of stone finishing - reliability, durability, environmental friendliness, fire safety, care simplicity, frost resistance and moisture resistance, and also resistance to temperature drops. Stability of color of our decorative panels for glueless mounting is provided by the German pigments which we use in our production. They keep the shades forever (especially along with special impregnations for an artificial stone).

Hints for glueless mounting of decorative panels by “Art-Kamen” company

1. Panels can be mounted on the wall made of any material. It is not necessary to prepare the surface with any compounds, but we recommend to handle wooden surfaces by anti-septic and fire-prevention treatment.

2. Wooden crates or zinc-coated profile should be installed on the wall.

3. You can warm surface between crates by mineral or stone wool and windproof if needed.

4. The panels fasten by means of special preinstalled clampings on the crates with zinc-coated self-tapping screws. The type of self-tapping screws depends on material of crates or profile.

5. Mounting starts from any corner, the direction of mounting – down up. Panels as puzzles, combines in one monolithic surface for the effect of solid stone or brick wall.

6. In case of facing by panels of types "Antique brick", "Small brick", "Wooden brick", "Clinker brick", etc., after mounting you can finish the seams by filling decorative compositions to imitate the natural laying, if required.

7. After the end of mounting, we recommend to impregnate the  mounted stone surface with special hydrophobic liquids. If mounting was made in cold season, then processing by protective impregnations needs to be postponed to warm season.

Mounting of decorative panels by “Art-Kamen” company can be performed in the most different weather conditions. This type of facing materials allows to perform an exterior finishing works both in warm, and in cold seasons.
Also our company offers services for mounting of decorative glueless panels. At the request of the customer, we can go to a site, make necessary calculations and mount panels on any surface.

Where to buy decorative panels for dry mounting

"Art-Kamen" company makes and sells decorative panels at the address:
Kazan, Aktayskaya St., 21
8 800 700-82-99
TOLL FREE CALL FOR RUSSIA
8 800 700-82-99
TOLL FREE CALL FOR RUSSIA
More details for driving directions and how to make the order, you can find at the Contacts page.